Product Range ▼ Self Cleaning Electro Suspension Magnet
 

Installation : prefereed installation of a suspended magnet is over the trajectory of material discharged from a blet conveyor. this is referred to as position 1 installation, If a trajectory well away from the belt is developed. This is the best way to utilize the full potential of the separator since the material being treaated is moving directly toward the magnet face. Its momentum assists the separation of iron. At slower conveyor speeds, as the trajectory of the discharge material becomes more nearly vertical, magnet position must be shifted back more nearly over the head pulley. At slow belt speeds a non-magnetic head pulley may be required. Installation with the separator over the moving bed of material before the discharge point of the conveyors is referred to as Position 2 mounting. Position 2 mounting is not recommended where belt speeds are excessive.

 

Selection : The most important factors in the selection of the proper suspension electromagnets are proper suspension electromagnets are burden depth, belt width, suspension position and tramp iron size. Other important considerations are listed below.

 

»

Burden depth

»

Belt incline

»

Belt width

»

Capacity (TPH)

»

Suspension Position

»

Material density

»

Tramp iron size (min. and max.)

»

Ambient temp

»

Material size

»

Altitude

»

Maximum lump size

»

Head pulley material

»

Belt Speed

»

Head pulley diameter

»

Degree o of troughing idles

»

Available current (AC and DC)



 

 

Position 1 And 2
(Manual Cleaning/MC-1 & 2
This unit consists of the magnet only. With manual cleaning magnets. It is necessary to periodially remove the accumulated tramp iron.)

 

 

Position 1
(Self-Cleaning/SC-1)
This unit consists of magnet with short belt-conveyor built around it to provide self cleaning. This unit is designed to be mounted in Position 1, as illustrated, at the head end of a conveyor either over the trajectory of the discharged material or over the head pullyey. It provides automatic discharge of tramp iron in the direction of the main conveyor travel.

 

 

Position 2
(Self-Cleaning/SC-2)
This seperator is similar to the Posistion 1 self-cleaning unit except the self-cleaning belt travels across the magnet face at right angles to the main conveyor, providing automatic tramp iron discharge at right angles to the direction of the moving material burden. It is designed for mounting in position 2, as illustrated, over a conveyor belt, picking table, vibrating screen etc.

 

 
 
 
Corporate Information Contact Information   STAY CONNECTED
»
Company Profile
»
Quality Assurance
»
Infrastructure
»
Contact Us
82, Industrial Area-A,
Ludhiana141003, Punjab India
+919855565923
+919878603423
+911614646016
saleskscgroup@gmail.com
www.kscgroup.in
 
Copy © 2020-21 KSC Metallurgy Pvt. Ltd. All Right Reserved
Powered By : Ayushi Online