Product Range ▼ Wagon Drill
 
 

KSC Wagon Drill can equally be well fitted with a top hammer drill or with a down-the-hole drill. The robust chassis make precision drilling easy, even when powerful feed forces are applied. Picture on KSC 120 F rock drill with rifle bar rotation.

The feed can be swung over a vertical arc of 98º and a horizontal toe hole can be spotted as low as 800mm aboce ground.

KSC also have a large selection of portable compressors for down-the-hole drilling and for top hammer drilling.

As Compressors and Drilling equipments have been developed together, they match perfectly. The matching Compressor for the KSC Wagon Drill high pressure Rotary Screw Compressor. With a free air delivery capacity of 210 L/S (445 cfm) at 10.5 bar (150 psig) it increases the output of the Wagon Drill, lowering the cost per meter drilled.

     
DTH Hammer Version
 
Drifter Version
     

D.T.H. HAMMER VERSION : The D.T.H. Hammer version of the versatile wagon drill is equipped with pneumatic D.T.H. Hammer with air rotation unit which is well-known for its simplicity & reliability. It consumes less air & delivers all round performance. Suitable for the hole size 102-114mm (4½) the top-hammer version is the first choice for quarrying, trenching & consolidation jobs.

TOP-HAMMER VERSION : The Top-hammer version of the versatile Wagon Drill is equipped with pneumatic rock drills KSC 120F which is well-known for its simplicity & reliability. It consumes less air & delivers all round performance. Suitable for hole sizes 48-76mm, the Top-hammer version is the first choice for quarrying, trenching & consolidation jobs.

 

FEED BEAM WITH WIDE RANGE OF ADJUSTMENT : The feed can be titled downloads from a horizontal position over a vertical 98º arc. Horizonal holes can be collared down to 800mm above ground. It can be swung laterally 15º in both directions. The beam is raised and lowerd by a manually-operated hydraulic cylinder.

HIGH -PRESSURE AIR SYSTEM The air system is normally scalled to a working pressure of 150 psig (10.5 kg/cm²) Lubricating values ensure a uniform and adequate supply of oil of the compressed air. All controls are grouped together for easy access.

KSC-25H NEW MODEL WAGON DRILL
(3 Wheel Drive with Hydraulic Brake.)
Specifications
 3 Tyre Mounting Skid Frame
1 No.
 Hydraulic Jack with Hand Operated Power Pack
1 No.
 Mechanical Screw Jack
2 Nos.
 Remote Contral Valves System with Hose Pipes Set
1 Set
 Wheel Driving Air Motor Set
1 Set
 Hand Brakes for Frong Wheels
2 Nos.
 Air Lubricators 5 Litre Capacity
1 No.
 Chain Feed Beam 2.5 Mtr with Cardle for Drfiter
1 No.
 Pneumatic Drill Catcher with Guide 32 mm
1 No.
 Air Motor with Worm Gear for Feed
1 No.
 Chain Tensioner
1 No.
 Water & Air Flushing System
1 Set

 
 
 
Corporate Information Contact Information   STAY CONNECTED
»
Company Profile
»
Quality Assurance
»
Infrastructure
»
Contact Us
82, Industrial Area-A,
Ludhiana141003, Punjab India
+919855565923
+919878603423
+911614646016
saleskscgroup@gmail.com
www.kscgroup.in
 
Copy © 2020-21 KSC Metallurgy Pvt. Ltd. All Right Reserved
Powered By : Ayushi Online