Product Range ▼ Anchor Mounted Drill Rig
 
PNEUMATIC ANCHOR MOUNTED DRILL RIG for drilling Angular holes from 20 degree horizontal to Vertical to a depth of 30mtrs specially used for drilling Grout holes for Strengthening of Foundation. The Mast is capable of handling 76mm dia ODX1.5mtrs (5ft) Drill Pipe fitted with 4.5H.P Rotation unit & 4.5H.P feed unit. The Mast is raised & lower by Hydraulic Cylinder operated by direction control valve or manually operated as per customized.

SPECIFICATIONS:
 
• Proven performance
• Low weight and good balance
• Stable Drilling capabilities
• Structural designed for extra rigidity
• Anchoring arrangement ensures perfect stability during drilling
• Rotation and winch units modified to provide additional power for faster drilling and rapid withdrawals, longer tool life etc...
• Rigid Output Shaft (Rotation Unit) with extra bearing support and thicker thread profile.

 
TECHNICAL SPECIFICATION
Mode of Drilling 90mm ~ 115mm (3 ½” ~ 4½”)
Hole Diameter 30 Mtrs. (100 ft)
Max. Drilling Depth (Vertical) 60mm / 76mm (2” / 3”)
Drill Pipe Diameter 60mm / 76mm (2"/3")
Drill Pipe Length 1.5mtrs (5ft)

General Dimensions & Weight
Height of RIG (Mast Vertical) 2850mm
Depth of RIG 1500 mm
Width of RIG 1200 mm
Weight 650 Kgs.
D.T.H. HAMMER VERSION : The D.T.H. Hammer version of the versatile wagon drill is equipped with pneumatic D.T.H. Hammer with air rotation unit which is well-known for its simplicity & reliability. It consumes less air & delivers all round performance. Suitable for the hole size 102-114mm (4½) the top-hammer version is the first choice for quarrying, trenching & consolidation jobs.
 
TOP-HAMMER VERSION : The Top-hammer version of the versatile Wagon Drill is equipped with pneumatic rock drills KSC 120F which is well-known for its simplicity & reliability. It consumes less air & delivers all round performance. Suitable for hole sizes 48-76mm, the Top-hammer version is the first choice for quarrying, trenching & consolidation jobs.
 
 
FEED BEAM WITH WIDE RANGE OF ADJUSTMENT : The feed can be titled downloads from a horizontal position over a vertical 98º arc. Horizonal holes can be collared down to 800mm above ground. It can be swung laterally 15º in both directions. The beam is raised and lowerd by a manually-operated hydraulic cylinder.
 
HIGH -PRESSURE AIR SYSTEM : The air system is normally scalled to a working pressure of 150 psig (10.5 kg/cm²) Lubricating values ensure a uniform and adequate supply of oil of the compressed air. All controls are grouped together for easy access.

 
 
 
Corporate Information Contact Information   STAY CONNECTED
»
Company Profile
»
Quality Assurance
»
Infrastructure
»
Contact Us
82, Industrial Area-A,
Ludhiana141003, Punjab India
+919855565923
+919878603423
+911614646016
saleskscgroup@gmail.com
www.kscgroup.in
 
Copy © 2020-21 KSC Metallurgy Pvt. Ltd. All Right Reserved
Powered By : Ayushi Online